Mikhailov's cages for rabbits
Cages for Mikhailov’s rabbits are convenient housing for animals with a design aimed at increasing offspring. The use of such cells greatly simplifies the maintenance of pussies.
Mikhailov's cages for rabbits
Mikhailov's mini-farm is equipped with automatic drainage, and also involves filling the feeders and drinking bowls without the participation of the farm owner. Also, such enclosures contain a heating system that regulates the temperature of water to room temperature.
The design of the cell according to the method of Mikhailov is designed primarily for the comfortable maintenance of a pregnant female and newborn rabbits.
Drawings of the cell at one time invented an outstanding academician I.N. Mikhailov. Nowadays, such dwellings are used on professional farms, on state farms and by private breeders. Due to its versatility, Mikhailov's mini-farm for farm rabbits greatly facilitated rabbit farming.
Cages with animals are arranged in several rows under one canopy. Each individual cell has an average size of 1.5 square meters. m, and 25 individuals can calmly live in it.
The design is a complex of 3 different tiers. The upper floor is used for growing rabbits, and in the lower floor there are feeders and drinking bowls. On the one hand, Mikhailov’s cage is insulated, and on the other, it is equipped with a grill to ensure free air circulation throughout the house.
Usually the grill is equipped with a fine mesh in two rows so that the animal does not sharpen its teeth about it. The bottom of the cell is covered with thin streaks at a small distance from each other. This is done so that the dirt from the cage gets into a special pan. In general, care for such a design takes no more than half an hour from the farmer.
A sloping ceiling does not cause stress in rabbits. On the contrary, such a roof resembles earthen arches in the hole of an animal. The mother’s mother is also integrated in the cage with heating, and thanks to a complex system of ventilation holes, drinking bowls and feeders, pregnant females usually do not need additional conditions. The advantage of such a cell is that it can be made at home.
Materials for the cell
For the construction of the structure according to the method of Mikhailov, rare materials or special skills of a joiner are not required. Drawings are also freely available. However, rabbit breeders argue that it is better to buy such dwellings for rabbits, because firms can guarantee quality.
If you want to try to make such a cell with your own hands, then for one design you will need:
- 2 plywood sheets;
- galvanized iron sheet;
- 8 sq. m roofing material;
- 2 m solid DPV;
- one m soft fiberboard;
- four bars.
Also, ordinary paint is used to cover the cell. For the south wall, you should purchase a fine metal mesh.
What parts does Mikhailov's cell consist of
In the design of such a dwelling for rabbits, several sites are provided that are responsible for different cell functions. Conventionally, the entire structure can be divided into such parts:
- ventilation system;
- drinking bowl;
- feeding trough;
- water heating system;
- mother liquor heating system;
- residential sections for rodents.
The rabbit mini-farm is equipped with several outlets, which are fed from an external source of electricity or an integrated transformer booth. Also make sure that the structure is not flooded.
In general, sockets are equipped with protection against water, but this may not save from heavy rain. Therefore, the cage should be placed under a canopy.
This tier is equipped with a horizontal support frame. Also, this part of the cage is equipped with a transformer box and tool shelves. This level is technical, it contains a special tank or bucket for collecting litter. The mud is drained through a cone-shaped shaft, which is upholstered with fiberboard sheets, and then covered with roofing material.
The material for such a shaft should be resistant to frost and not give in to rust. The drain design must be sealed, otherwise there is a risk of leakage of sewage, which leads to unsanitary conditions and an unpleasant odor. When building a cell with your own hands, it is mandatory to use drawings. Without them, the rabbit mini-farm will not work strong and reliable.
The walking part of the cell and the mother liquor
The lower tier is mounted on a stand with four support legs. Their height is about 10 cm. The left side of the cell is strengthened by a grid, a hole of 1 centimeter is made in it. The floor consists of several compartments, in which rabbits can be caught and inspected.
The walking compartment of the mini-farm contains a drinking bowl and a feeding trough. Below is a small hole that leads to the drain shaft. The floor is made of thin slats that are stacked on top of the hole. The floor itself is made of load-bearing boards and is able to withstand heavy weight.
The flooring is fixed at an angle so that the eared during the jumps do not get injured paws. Reiki is reinforced with metal plates so that rabbits do not grind their teeth about them.
The nesting compartment is primarily equipped with a special hinged door, it adheres to the bottom with fasteners. Thus, the farmer has a place for inspection, and the rabbits will not fall out of the cage. In this part of the cell, the floor is continuous and slightly below the bottom. The size of this part of the cell allows you to freely install the mother liquor. The nest is located separately from the other compartments, and the female manhole can be closed if necessary. Ordinary rabbits are limited in movement on this part of the second tier, since the shelves block their path.
An automatic drinker is located in the walking section of the compartment. It is an iron tank in which several cans are turned upside down. Corks of these bottles have a number of holes. This allows you to control the water level in the drinking bowl without human intervention, and rabbits will not flood their own housing.
Drinking bowl for rabbits
The size of the automatic drinker compartment depends on the size of the canister and capacity. The entrance to this compartment is cut out of plywood, but the view for entering the uterine compartment should be made of metal materials. The water bowl is not fully accessible for rabbits. Part of the tank is removed deep into the structure, since it contains heating devices that automatically turn on if the water temperature is below 8 ° C. If the outdoor temperature is above 12 ° C, then the electric soldering iron turns off. When building a cage with your own hands, you must not forget to isolate the wires and electrical appliances from animals and water.
Next to the drinker is a specialized feed for feed. The lower part of the feeder goes to a special place between the yards. This hole is equipped with a utilizer that helps to collect flour and garbage, as well as the food that rabbits rake with their front paws. To reduce the amount of spoiled feed, farmers recommend equipping the structure with a special nut that will prevent fluffers from spreading the feed.
The feeder has a wedge-shaped appearance. The upper part is hinged, and thus the feed is poured. At the bottom of the hopper is a sieve that separates flour and fine dust from the feed. The garbage subsequently falls into the waste disposal facility. The feed itself enters the hole, which is usually not more than 10 square meters. cm.
The farmer should often check the cleaner and clean it, otherwise the feeder may become clogged.
A feeder with juicy and roughage can be located simultaneously in 2 places: on the upper and lower floors of the farm. It is a door with a strong mesh.
Outside, a special bunker is hung from the hole in which hay and vegetables are laid. The hopper has a wedge-shaped shape and under the force of gravity the feed enters the net.
The top tier is most often used for two purposes: as an auxiliary mother liquor or as a compartment for sitting. For the first case, this part of the cell is made in the likeness of the lower floor. Tiers differ exclusively in their parameters. The floor is divided into 2 sections, in which rabbits are placed. Typically, the upper level in its construction exceeds the lower level by 20 cm, and its right side extends beyond the mini-farm.
Upper tier of a mini-farm
If the goal of the upper tier is to create a place exclusively for babies and without planting a female for children, then the design does not need a two-level bottom. In this case, the rails are placed on boards with a cross section of 20 x 80. Also, the rack system itself changes. The floor is laid perpendicular to the lower section, thereby increasing the strength of the cell. In each compartment there are doors and a feeder exactly as below. The southern part of the jigging floor is equipped with fine-mesh doors.
So, Mikhailovsky mini-farms are an effective way to breed rabbits at home all year round. Thanks to automatic feeding and cleaning, the farmer takes half an hour a day to ensure the necessary care for rabbits. Similar designs are used both in large farms and at home. Also, inexpensive materials and drawings in the public domain allow you to build such a structure with your own hands.