How to make a chicken feeder from a sewer pipe

A chicken feed pan from a sewer pipe is a fairly common design. Such feeders are very durable and reliable, wash well. After repair or installation of the sewer system, scraps from PVC pipes often remain.

Sewer chimney feeder

Types of vessels for feeding

Bird feeders in the photo are divided into several types:

  • tray;
  • grooved;
  • automatic.

The automatic design is most suitable for chickens, which will protect the feed from contamination and allow it to be poured into the feeder once a day. Such systems are most often made from improvised materials. This, firstly, saves money, and secondly, completely eliminates the option of buying a Chinese fake.

What are the benefits of self-made feed containers?

In the private sector, things are often overwhelming, and chickens, especially large meat breeds, need a sufficient amount of feed, which every now and then needs to be run to sprinkle. The ideal option is hopper feeders from pipes that can be found in the photo. Having made such a feeder with your own hands, it will be possible to save money on the purchase of feed, as well as to rationally distribute your time.

A feature of almost all poultry is the habit of rummaging in the feeder and scattering feeding, which as a result becomes completely unfit for food. Plastic pipe feeders meet all the necessary parameters. In addition, the owner does not have to constantly adapt to his pets in order to feed them, and put food in the hopper feeders, when it is convenient for him.

Experienced poultry farmers have long been using bunker designs for feeding from a plastic pipe. There are several interesting variations of chicken feeders that are constructed with your own hands. Some of them can also be used to feed rabbit livestock with dry food. In order to have a visual representation of the design of such feeding systems, we suggest watching a video of the corresponding subject.

Vertical feeding system

To make such a feeder, you will need:

  • meter section of eco-plastic in a diameter of 110 mm;
  • oblique tee;
  • two stubs.

The eco-plastic cut should be divided into 3 parts: 70 x 20 x 10. A plug should be put on the 20-cm cut - this will be the base of the feeder. Next, knee up, you need to wear a tee. A ten-centimeter section must be inserted into the tee, and the largest piece of pipe in it.

That's the whole system, now it remains only to fix the device on a pole with a wire. The second plug is needed to cover the feeder, thus protecting the feed from contamination. The feed in this design is enough to feed about 15-20 broilers or 30 layers in a day.

Horizontal feeding system

This design is also not particularly difficult to manufacture and cost a penny. To make a feeder, you will need:

  • a two-meter section of a plastic sewer pipe 110 mm in diameter;
  • a knee with a similar diameter;
  • 2 stubs;
  • drill;
  • jigsaw;
  • hacksaw for metal.

A two-meter pipe is divided into 2 meter parts. In one of the parts, it is necessary to make holes of such a diameter so that the bird's head plus 1 centimeter can climb through them. Carefully mark the location of the holes with a marker, and then cut it out.

On the one hand, a plug is put on the cylinder with holes, and on the other, a bend into which a second meter section of the plastic pipe is inserted. If necessary, put on a second knee to bring the grain receiver outside the fence. To have a clearer idea of ​​how to make a bunker chicken feeder, you can use step-by-step photos.

Another bunker feeding system

This version of the chicken pipe feeder is perfect for a little older chickens. To make it, you need to take 2 polypropylene pipes: the first - 10 x 200, and the second - 30 x 32; a sheet of plywood 30 x 30, at least 1 cm wide, 5 liter plastic bottle.

A two hundred millimeter pipe should be attached to the plywood. In a cylinder of smaller diameter, a vertical incision of 10 cm should be made. After this, having also stepped 10 cm from the edge, you need to make a horizontal incision. Now the narrow pipe needs to be inserted into the wide one. Then from the bottle you need to cut off the bottom and put it with the neck on a thin profile.

To prevent birds from turning over the feeder, it should be hung on the wall. The amount of grain in the feeder is enough to feed 30 broilers for more than 24 hours. This design is good not only because you do not have to constantly run to fill up the feed, but also because the birds can be accustomed to discipline. Over time, accustomed to the fact that there is always enough food, they will stop crowding with the whole flock near the feeder.

Nipple drinker - how to make it

In addition to feeders from an eco-plastic pipe, you can build a nipple drinking system for birds. This design allows you to reduce water consumption and give the pestle exactly as much water as it needs, not a drop more. To do this, you need a nipple, a drop catcher, eco-plastic of square cross section, a fixative. The presence of a plug and adapter is also important.

For adult birds, nipple systems with a rotation of 180 ° are used, for chickens - in 360. With the closed method of keeping cells in cages, the nipple system can be attached both inside and out. A drop catcher is installed directly under the nipple. It is recommended not to install nipples without drip catchers, because water will spill directly onto the floor, which creates a lot of dirt and increases humidity in the chicken coop. The number of such drinkers is set, depending on the number of birds at the rate of 1 drinker for 3-4 individuals.

The most common liquid dispenser is a 20 liter bottle. It is connected by flexible tubes. At the entrances to the tubes they put a ball valve that regulates the flow of water. Water to the nipple will be supplied directly through the tubes, so each valve should be well sealed to avoid leaks. Drop collectors can also be made with their own hands from plastic bottles.

The winter drinking bowl will be distinguished by a warmed capacity in which you can insert the most ordinary boiler of medium power. The water in the drinker will not heat up above 10 ° C in severe frosts, however, this method will save the liquid from freezing. You can design a similar system, install devices for heating water and equip the design with a thermostat to regulate the temperature and keep it at a constant level.

Conclusion

If we are talking about breeding chickens, then drinking bowls and feeders are the main aspects of future success. Experienced farmers have long learned how to make them from improvised materials, which are quite a lot in the private sector. For example, after repairing the sewage system, very often there are scraps of plastic pipes. It is from them that you can make an excellent bird feeder.

The chicken feeder should be made of durable, non-hazardous material, clean well. Plastic pipe constructions are distinguished by all these qualities. Chicken often gets into the dishes with its paws, tears the contents and scatters around. Such a habit is rather wasteful for a wallet, so it is best to make do-it-yourself designs that will prevent this behavior.

In addition to feeders from plastic profiles, you can design a nipple drinker that optimizes the flow of water. The chicken gets exactly as much water as needed. In winter, insulated water containers are used in which a boiler is placed. If from the above instructions it is not entirely clear how to make a feeder from a plastic pipe with your own hands, you can use the video in which experienced farmers share their secrets with beginners.

It is not recommended to hang nipples without drip pans. This step can harm the hens. Water will drip onto the floor, in connection with which dirt will appear and air humidity will increase, which is fraught for chickens with infection by various infectious diseases. Bunker systems for feeding and nipple systems - for water, it can be used not only for caring for poultry, but also for keeping rabbit families.

Feeding rabbits is also quite expensive, due to the fact that animals often turn over drinking bowls and plates, trample their feed. Designs for bulk feed from plastic pipes help to perfectly cope with several tasks at the same time:

  • Serve feed dosed;
  • for sufficient feeding of rabbits, it is enough to put food once a week;
  • these types of feeders are great for feeding large numbers of rabbit herds.

Recommended

How to choose top dressing for the rapid growth of thuja
2019
How to distinguish geese Linda from other birds
2019
The best varieties of zucchini, or how to achieve the perfect harvest
2019